Contact Us


General Enquiries
info@zeropace.com

 

Help and Support
support@zeropace.com

Comments about this site
webmaster@zeropace.com

 


 

 

 

 

 

 

 Download the ZeroPace Uploader for Online Training Log


The ZeroPace Uploader is a small program that allows you to upload heart rate data files from your heart rate monitor to the ZeroPace Online Training Log.  The ZeroPace Uploader is free to use for online subscribers wishing to import heart rate files, or exercises directly from supported Polar devices.


3 December 2007 - Version 1.0.8
Power Tap support
Polar CS/RS device adjustment


 

Installation :  The installation package for ZeroPace Uploader is approximately 7 Mb this will take about 35  minutes to download using a 56K modem, or 2 minutes using a 512kbs broadband connection, and 1 minute or less for faster connections in ideal circumstances.  The installation will automatically upgrade from any 1.x version of the ZeroPace Uploader.

After installing the ZeroPace Training Log, you will need to configure the connection type you use for communicating with your Polar device.  This can be SonicLink, IrDA, USB, or, COM1 to COM9 for Serial communications.  The connection type can be changed in the Preferences screen on the Tools menu.  For users with the USB infrared lead, you will need to run PolarUSB.exe that is located in the ZeroPace Training Log folder, this will configure the correct drivers.

Supported Polar Devices :  The following Polar devices are supported via IR interfaces: Polar CS400, Polar CS600, Polar RS400, Polar RS800, Polar S120, Polar S150, Polar S210, Polar S410, Polar S510, Polar S520, Polar S610, Polar S610i, Polar S625X, Polar S710, Polar S710i, Polar S720i, Polar S725, Polar S725X, Polar S810, Polar S810i, Polar AXN300, Polar AXN500, Polar AXN700, Polar E600, Polar F4, Polar F6, Polar F11 and Polar F55.  The following Polar devices are supported via SonicLink: Polar F6, Polar F11, Polar CS100, Polar CS200, Polar CS300, Polar RS100, Polar RS200, Polar s410, Polar s510 and Polar s520.  

System Requirements :  Windows 2000, Windows XP or Windows Vista.  Pentium III or equivalent and higher with at least 256Mb of memory and 50Mb of free hard drive space.  Internet Explorer 6 or above needs to be installed.  Screen size of 1024 x 768 with high-colour recommended.  We no longer actively support Windows 95, 98 or ME, the Uploader may still work on these systems but we do not test or provide fixes specific to these operating systems.

Note :  Windows 2000 may require the following library from Microsoft to support enhanced graphics:

http://www.microsoft.com/downloads/gdipluslibrary

 

Copyright © 2001 - 2008 ZeroPace.  All Rights Reserved.  Privacy Policy  |  Terms and Conditions